Viking Emergency Phones Manuál s instrukcemi stáhnout pdf

G.A.L. HANDS FREE EMERGENCY

TELEPHONE

MODEL GAL-6400

I. GENERAL

The GAL-

6400 Hands Free Emergency Telephone permits a

pre-programmed number to be dialed when the

"push to call"

button is depressed on the station. The emergency personnel

upon receiving the call can hear a 10 second recorded message.

By pressing the star "*" key on their telephone keypad, the

emergency phone will respond by stopping the recorded mess

age

and/or issuing a pre-

programmed tone location I.D. number and

illuminate the "CALL RECEIVED" indication. The “CALL

RECEIVED” indicator will also light automatically after playing

the recorded message a programmed number of times. During the

call the unit will act as a standard speaker-

phone. At any time

after the star key is pressed, the pound ”#” key can be used to

hang up the emergency phone.

The unit also has the capability of dialing up to four additional

pre-programmed numbers if the first number

called is

unanswered and/or busy.

II. QUICK PROGRAMMING INSTRUCTIONS

To program a single emergency number to be dialed and voice

location announcement to be recorded without changes to the

security code or tone location ID.

A. Connect the phone line to t

he modular connector supplied on

the GAL-6400.

B. From another phone, dial the phone number for the line that

the GAL-6400 is attached to. The GAL-6400 will answer

immediately.

C. Dial the factory set security code 1,2,3,4,5,6 on the telephon

keypad. Two beeps should be heard.

. Using the telephone keypad, enter the emergency number the

GAL-6400

should dial followed by #,0,0. Two beeps should

be heard.

1 2 3 4 5 6 7 8 9 10

Shrnutí obsahu

Strany 1

1 G.A.L. HANDS FREE EMERGENCY TELEPHONE MODEL GAL-6400 I. GENERAL The GAL-6400 Hands Free Emergency Te

Strany 2

10 B. Programming problems 1. GAL-6400 does not accept programming. Two beep response from unit is not heard whe

Strany 3

2 E. To record a 10 second voice location message, dial “* 4” and speak after the tone. To stop the recording, press any tel

Strany 4

3 This switch determines whether or not the push button can cancel (hang up) a call after it has been initiated. It is recommended that

Strany 5

4 C. Initially test the unit by pushing the "PUSH TO CALL" button. A dial tone followed by touch tones should be heard. Push the

Strany 6

5 Note: This example would be used on telephone systems that require pressing "9"

Strany 7

6 E. The GAL-6400 has a built in digital recorder/announcer that can be used to give location identification. Both the emergency personne

Strany 8

7 2. At the end of recording, play back of the message is automatic. To repeat play back for your review enter *5. To re-record, enter *4. 3. To

Strany 9

8 feature (second number will not be dialed). The factory default is 1 (feature disabled). Redial

Strany 10 - PUB-0002N 0505

9 - Store time functions & set redial feature: 0.4 seconds Talk/Listen 6 minutes Max. Call Time 50 seconds Silence Time

Další dokumenty pro Bezpečnostní systémy pro řízení přístupu Viking Emergency Phones

Zobrazit dokument Viking Emergency Phones Uživatelský manuál

Viking Emergency Phones Uživatelský manuál (4 stránky)

Zobrazit dokument Viking Emergency Phones Specifikace

Viking Emergency Phones Specifikace (12 stránky)

Viking Emergency Phones Specifikace (4 stránky)

Komentáře k této Příručce

Žádné komentáře

Viking Emergency Phones Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro Bezpečnostní systémy pro řízení přístupu Viking Emergency Phones. Viking Emergency Phones Programming instructions Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro Bezpečnostní systémy pro řízení přístupu Viking Emergency Phones

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Viking Emergency Phones